Homemade Biodiesel Kits Are Used to Make Biodiesel Fuel by First Timers
The cost of fuel has gone up again that people are thinking of alternative ways to save up on other things just so they can still continue to make use of their vehicles. Actually, there is a better way by which we can save up on fuel without having to let go of other necessities or luxuries that we have in our life. Sometimes we need all this to keep us going. When you take away one or two, you may take away your only source of happiness. So think twice before cutting off hobbies or things that you are already accustomed to.
One thing by which we can save gas is if we make it ourselves. It is possible since homemade biodiesel kits are available for consumers to buy them. There are instructions online and there are even step-by-step videos on how to make biodiesel fuel. These are especially useful for people who prefer to see it than reading about it. The great thing about seeing how it is made is you can actually see the equipments that are being used. So you can always pattern your equipment with what is being shown.
Since you will be doing it yourself, there are a couple of things you have to watch out for. You have to watch out for methanol and lye because it is dangerous. Aside from that, since you will be making use of heat and vegetable oils, fire is always a possibility. First time makers of biodiesel fuel should be extra careful when proceeding and like any other endeavor it takes practice to perfect it.
Under the relevant European Directives, an Environmental Statement is the formal product of an Environmental Impact Assessment. Environmental Statements are often organised in a way that describes the environmental baseline, mitigation and effects for each type of environmental receptors: ecology, water resources, archaeological resources, human beings etcetera. Contaminated land is often managed in the same ways as the various environmental receptor groups, although it is principally a cause of impacts rather than a receptor. It also often refers to a pre-existing condition and its damaging effect is on a variety of different receptors such as human health, structures and buildings, surface water features, groundwater features and ecology. This often means that land contamination specialists struggle with integrating the issue in a logical manner in an Environmental Statement. Sticking to the structured approach of an environmental statement is essential to ensure a clear description of the existing environmental condition, the potential impacts and the actions taken to avoid, minimise, offset or manage the impacts. This article is based on UK practice and legislation, although fundamentally the issues should be similar within other contexts.
Contaminated land is in many countries considered on a source-pathway-receptor basis. This is important to understand the impact land development can have on the issue of contaminated land. Development can interfere with any of these three elements. It can introduce sensitive receptors by changing the use of land, for instance by building new residential units on a site that was previously used for heavy industry. New pathways linking pre-existing contamination with an existing receptor can be formed, for instance when piling through a non-permeable layer connecting a layer of contaminated soils with a deep aquifer. Finally by introducing pollutants on the site a development project can introduce a potential source of contamination.
The second element to consider is the structured approach of an environmental statement. Apart from the introductory and procedural elements described in the environmental statement, a good environmental statement comprised the following sections:
environmental baseline conditions
potential environmental impacts
mitigating measures
residual environmental impacts
There should be a logical relation between the different sections. Any receptor that is affected and described in the section about the potential impacts and effects should have been introduced in the section describing the baseline. Any material impact should be assigned a mitigation or management action etc. Implementing this structure allows a clear description and understanding of the environmental impacts and the way it will be managed.
Applying these principles to contaminated land will result in a baseline condition section that describes the current sensitive receptors that are present within the potential sphere of influence of the development, the sensitivity and importance of these receptors, the presence of any pre-existing contamination and the presence of actual and potential pathways. The next section, potential environmental impacts or effects, first considers the impacts that the development will have in terms of the introduction (or removal) of sensitive receptors and the creation of new pathways between existing and potential pollution sources and receptors. In addition this section will describe the potential environmental impacts that are associated with the introduction of new sources of contamination. In the third section, mitigating measures, a description of the actions to mitigate each of the impacts that may occur should be provided. Finally a statement of the residual impact of the development is provided in the last section: residual environmental impacts.
Recycling has become the catch all phrase often used in place of the 3 R’s. But in its truest form recycling means taking one thing and changing it, usually chemically, into another. This is not to say that recycling is without value; it is certainly better than putting the items in the bin where they will end up in landfills and leach chemicals into our ground water. It is though to say that before you place anything in the recycle bag, first consider if you could reduce or re-use it, because everything that ends up in the recycling bag will have to be altered before it can be used again. Even then it is cleaner to produce goods from recyclables than from raw materials.
Here are just a few reasons to make certain that after you have reduced the amount of waste your create and re-used as many things as possible that your family puts as many things as possible into the recycling bins:
Recycling one aluminium can saves enough energy to run a TV for three hours — or the equivalent of a half a gallon of gasoline.
Each ton (2000 pounds) of recycled paper can save 17 trees, 380 gallons of oil, three cubic yards of landfill space, 4000 kilowatts of energy, and 7000 gallons of water. This represents a 64% energy savings, a 58% water savings, and 60 pounds less of air pollution!
The 17 trees saved (above) can absorb a total of 250 pounds of carbon dioxide from the air each year. Burning that same ton of paper would create 1500 pounds of carbon dioxide.
Recycling plastic saves twice as much energy as burning it in an incinerator.
The energy saved from recycling one glass bottle can run a 100-watt light bulb for four hours. It also causes 20% less air pollution and 50% less water pollution than when a new bottle is made from raw materials.
A modern glass bottle would take 4000 years or more to decompose — and even longer if it’s in the landfill.
Today is the actually a great day to talk about recycling. Each Thursday the council sends around men to collect our recyclables. The council gives us re-usable sacks, which we can use to collect all paper, cardboard, tin cans, aluminium, glass bottles and jars and plastic bottles. Unfortunately, they do not over recycling for other plastics. As I have been writing this series of blogs that has been one thing that I have been especially mindful of: how much plastic packaging manufacturers use that cannot be recycled and that it is estimated takes over 500 years to decompose in landfills.
But it is not just our plastics, glass, metals and paper that we recycle. Thanks to a wonderful programme through the Islington council, last year we were able to purchase a subsidized wormery to recycle our food waste into compost and liquid fertilizer for growing my own food. Actually, even though we may think that food thrown into the bin will degrade relatively quickly in the landfills, the biggest problem is the amount of methane, a dangerous green house gas, which it produces in that time. Methane is twenty times more potent than carbon dioxide and a major contribute to climate change. While my wormery cannot accommodate meat products I put all peels and unused fruits and vegetables into it. I should soon be harvesting my first patch of compost…just in time for my summer garden.
So how does my family do on recycling? Not too bad honestly. This week we had two bags of recyables and will only have two half full 13 gallon bin bags of other rubbish. Actually hubby and I got into a minor disagreement over the trash last night. One of the first rules of the 3R’s is to only throw out your garbage when the bag is full. In our case though, it had begun to smell. I am still looking for a solution…if anyone has ideas they would be greatly appreciated. But for a family of three adults and one pre-schoolers two large bags of recycling and one full 13 gallon bin bag in a week is pretty good I think. I imagine that there are single people, who put more than one bag in the bin each week.
Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.
Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.
Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.
Water Efficiency - Water Used in Generating US Electricity
In my four-article series on water use (The Resource Matrix), I took you on a journey to reveal the layers of The Resource Matrix in order to help you understand how water will be a highly contested commodity tomorrow, possibly as much as oil is fought over today.
You learned about your water footprint and a website where you can calculate it, virtual water and virtual water transfers, whereby choices here affect water availability elsewhere, to the point of some people not having enough water to drink in order to produce inexpensive dyed cotton, along with insane choices such as growing crops in the desert.
You learned that on average it takes 1854 to 3000 gallons to produce one pound of beef.
Yep, it’s it’s been a great journey through the sidetrip city of the Resource Matrix.
Today, we’ve found the on-ramp to the Green Lighting Interstate and are driving to take a look at water use in generating electricity.
For a simple reason. It takes a lot of water to produce electricity.
How much? 5% of all US water? 10%? Can’t be as high as 25%?
Electricity and water?
I thought the issue was fossil fuels and greenhouse gases
The U.S. Geological Survey (USGS) estimated water use in the United States in 2000.
Their grand total: 408 billion gallons per day withdrawn for all uses.
The number 1 spot, weighing in at 48%, was thermoelectric power.
Irrigation earned the runner-up prize at 34%.
The 195 billion gallons need to come from somewhere, and actions have consequences. Environmental ones, as in 40 million fish in the Great Lakes killed each year due to being trapped against water intake devices. That’s a lot of Friday night fish dinners.
How much water is used in generating electricity?
Large fossil fuel and nuclear plants require incredible quantities of water for cooling and ongoing maintenance.
Water for thermoelectric power is used in generating electricity with steam-driven turbine generators. It uses 48% of all water in the US.
According to the Pace Energy and Climate Center, the amount of water used for power plant cooling varies by each specific power plant’s electricity generating technology and size. Nuclear reactors require the most water for cooling, and baseload fossil fuel power plants come in second.
The Salem Nuclear Generating Station alone takes 3 billion gallons a day from the Delaware Bay, according to the Pace Energy and Climate Center.
Nationally:
Steam electric generating plants across the nation draw in more than 200 billion gallons per day.
Nuclear and fossil fuel power plants drink over 185 billion gallons of water per day.
Geothermal power plants add another 2 billion or so gallons a day.
Most renewable energy technologies require little or no water for cooling.
These numbers are starting to sound like the same ones the U.S. Treasury and Federal Reserve Bank use.
Imagine watching your favorite science program where astronomers explain that the universe is 78 billion light-years wide (78 billion units of 5,878,630,000,000 miles). There is absolutely nothing in our experience to help us wrap our mind around it.
How much is 3 billion gallons per day?
The Delaware Bay feeds Salem Nuclear Generating Station 3 billion gallons a day.
Imagine this rectangle: a football field with end zones (360 feet long x 160 feet wide). Then add to it walls on each side of the rectangle to create a container to hold the 3 billion gallons you pour into it.
How high do you need to make those walls to contain 3 billion gallons? 6915 feet high. Or 1.3 miles.
Maybe 6915 feet high is still hard to imagine. So how deep do you cover the field in order to feed the Salem plant every minute? Answer: 5 feet deep. Every minute.
48% of all water use: We’re Number One!
How much is 195 billion gallons per day?
Using the USGS figure for 2000, thermoelectric power nationwide used 195 billion gallons a day, or 48% of all water used in the US. My guess is the water use has grown since then.
How high are the walls on our football field now? 449,475 feet or 85 miles high. We’re back to US Treasury and astronomy numbers again.
So, let’s get a higher-level view to help us.
Lake Erie holds 116 cubic miles of water.
Nationally, thermoelectric power uses 195 billion gallons a day - or 64.2 cubic miles a year.
We drain Lake Erie every 22 months.
But the water used is returned to its source.
So what’s the issue about water use?
Power generation returns 98% of the water back to its source (bay, lake, river, ocean).
It’s the environmental consequences.
The Pace Energy and Climate Center explains it neatly:
Withdrawal of large volumes of surface water for either power plant cooling or hydropower generation can kill fish, larvae and other organisms trapped against intake structures (impinged), or swept up (entrained) in the flow through the different sections of a power plant.
Examples include:
The Salem Nuclear Generating Station is responsible for an annual 11 percent reduction in weakfish and 31 percent reduction in bay anchovy.
At the Indian Point 2 and 3 reactors on the Hudson River, the number of fish impinged totaled over 1.5 million fish in 1987.
The 90 power plants using once-through-cooling on the Great Lakes kill in excess of 40 million fish per year due to impingement. (Once-through cooling needs a continual flow of new water, and uses 30 to 50 times that of a closed cycle system. Closed cycles cool down water from steam then reuse it.)
The diversion of water out of the river removes water for healthy in-stream ecosystems:
Stretches below dams are often completely de-watered.
Fluctuations in water flow from peaking operations create a “tidal effect,” disrupting the downstream riparian community that supports its unique ecosystem.
A dam’s impoundment slows water flows, which hinders natural downstream migration of many fish species.
By slowing river flows, dams also allow silt to collect on river and reservoir bottoms and bury fish spawning habitat. Silt trapped above dams accumulates heavy metals and other pollutants. Disrupting the natural flow of sediments in rivers also leads to erosion of riverbeds downstream of the dam and increases risks of floods.
The impoundment of water by hydropower facilities fundamentally reshapes the physical habitat from a riverine to an artificial pond community.
This often eliminates native populations of fish and other wildlife.
Dams also impede the upstream and downstream movement of fish and other wildlife, and prevent the flow of plants and nutrients. This impact is most significant on migratory fish, which are born in the river and must migrate downstream early in life to the ocean and then migrate upstream again to lay their eggs (or “spawn”).
As mentioned above, withdrawal of water into turbines can also impinge or entrain significant numbers of fish.
The cleanest kilowatt is the one never used:
Back to those compact fluorescent lamps and LEDs
PowerScorecard.org explains the solution:
By re-directing electricity dollars to support environmentally benign energy resources, consumers are empowered, in states that offer supply choice, to influence the existing generating resources that are deployed to meet demand.
They can also support the construction of new and cleaner electricity resources that will be built to meet overall growth in demand in the future. By supporting these power options, consumers can minimize many water use and consumption impacts. Still, directing your dollars to cleaner power products in no way helps remediate damages that already have occurred. Consumers can stop the construction of new hydropower facilities or alter conditions of siting and operation, but they cannot undo previous environmental degradation that occurred at existing hydropower facilities.
In short, reduce your use of electricity.
More Info:
We used several sources for this article, including the PowerScorecard.org website, which is produced by the Pace Energy and Climate Center, which is part of the Pace University School of Law’s Center for Environmental Legal Studies, Pace University, White Plains, New York.
Ratings of Electric Power Choices for some service areas.
More info on electricity and the environment:
Technologies
Climate change
Acid rain
Ozone depletion
Water use (our article today)
Water quality
Land: on-site and off-site impacts
Thanks for letting us keep you updated . . .
To your green, brighter future,
Cinnamon Alvarez,
A19
And now I would like to offer you free access to powerful info on energy efficiency that’s easy to read and cuts through all this “green” information clutter — so you can literally start making positive changes today.
Unless you have been trapped in a cave for the last seven months you are well aware of the disaster overtaking the American automobile industry. Our government is using billions of taxpayer’s dollars to prop up an industry that has been one of the leading facilitators of numerous ills in our society, which will also take billions of dollars to repair, if it is even possible to do so.
Air pollution which contributes to increased medical costs, urban sprawl, a negative balance of payments from importing oil and global warming can all be traced at least in part to our addiction to the automobile. Now that I’ve ranted about the autos effect upon our society I also greatly acknowledge that we all, myself included, greatly enjoy the mobility and freedom provided by the pernicious machine. We can’t live with ‘em and we can’t live without ‘em. What are we to do?
A lot has been written about the currently nonexistent plug-in electric car. This machine when it finally hits the market could help solve some of our problems but current pricing estimates place the car in the forty thousand dollar range. I’m sure of one thing, it won’t solve many problems if you don’t sell them and at that price I’d hedge my bets.
However, there is one personal transportation option on the market that fits into all of President Obama’s initiatives for energy self sufficiency, global warming (reduction of green house gases), health care (exercise and weight loss), environmental protection (reduction of air and water pollution), and infrastructure renewal. That option is the Electric Bicycle.
The electric bike using lithium batteries (traditional lead-acid is very environmentally harmful) can go, depending on load factors and riding habits, roughly twenty miles at twenty miles an hour on one charge. It is almost completely silent, gives off no emissions, does not use foreign oil, does not require much room to operate or park, never needs a tune up and provides exercise. It eliminates many of the drawbacks of riding a traditional bicycle for basic transportation while having few of its own. I recognize that not many of us are hardy enough to ride a bike in the rain, snow or freezing cold but that applies as well to motorcycles, motor scooters and traditional bicycles. The electric bike can get you farther, faster without arriving at your destination soaked in sweat. It can operate in many places where other motorized vehicles cannot and makes taking hills a cinch. Riding five or ten miles to work is no big deal and you can simply pedal around bottled up traffic. Usually the lightweight batteries easily detach from the bike and can be carried into your place of work or school for recharging.
Some electric bicycles offer high tech extras such as LiFePO4 batteries that are good for a thousand recharges, regenerative braking that helps recharge the battery much as a Prius does, and internal gearing to generate more torque for uphill climbs. Most electric bikes use what is referred to as a hub motor. This is not a traditional gear or belt-drive motor but is built directly into the hub of one of the wheels. This motor contains two internal rings of opposing magnets that when power is applied causes the wheel to spin. Such motors need little service and never require oil changes, spark plugs or new belts.
Electric bikes come in several of styles. There are the traditional “beach cruiser” and mountain bike styles as well as electric folding bikes, tricycles and “road bikes”. The electric folding bikes are particularly interesting. Smaller and lighter than a traditional bicycle, they easily fold up and fit into a car trunk and can be carried on a commuter or subway train with little effort. You can take the train to your stop, unfold the bike and pedal on your way. They are also useful for those who live in tight quarters and have no external place to store their ride.
For those of you that are moderately handy with tools, there are a number of electric bike kits on the market that allow you to adapt an ordinary bicycle into an electric bike. One company, Worldwide Electric Bikes, has a particularly well-designed kit that has many of the features I previously mentioned. These electric bike kits do not require a high level of mechanical ability to install. A few common hand tools, a basic understanding of how things go together and the ability to read directions is all that is required. However, if you don’t know the difference between a crescent and a hex wrench, you may wish to buy a pre-made bike or have someone install the kit for you. If you do choose to go the kit route, you can end up with a much more powerful and sophisticated bike for substantially less money than a factory built electric bike.
Electric Bicycles in all forms have long been a staple of personal transportation in Europe and Asia where there are hundreds of thousands in operation. In the United States bicycles have traditionally been dominated by the toy or recreation market or for the dedicated enthusiast. In both Europe and Asia, cycling has been a traditional means of basic transportation. I believe that this is going to be more and more the case in this country. People are avidly seeking relief from the high financial and societal cost of automobiles. The electric bicycle, while not a panacea, is definitely poised to help provide a portion of that relief.
Electric Bicycles are inexpensive to purchase, require no license or insurance, have a negligible cost of operation and are totally “green”. So, what’s not to like?
How often when you go to the grocery store are you asked if you want paper or plastic grocery bags? Well the best answer to that would be NEITHER. To keep the U.S. stocked with paper and plastic grocery bags, takes about fourteen million trees and twelve million barrels of oil every year! Investing in a few reusable bags makes a lot of sense.
Think about those little paper receipts you get at the gas pump and the ATM machine. If all people would simply note it in their checkbook, or in a small notebook when they made a purchase or withdrew money, it would be saving enough paper to encircle the globe fifteen times!
If every American would by one roll of recycled paper towels instead of the others, it would save over half a million trees. And how about turning the car off when you are waiting for someone, in the drive-thru lane or stuck in a huge traffic jam? When a car idles for more than a minute it is polluting the air and wasting your gas.
Cordless phones are replacing conventional phones. But think about it… sitting in a recharging cradle and using up your electricity twenty-four hours a day and every day of the week! Replace one or two cordless phones with your old conventional ones and you’ll save energy. The old fashioned ones use only a tiny bit of electricity, and will work when the power is off. If you insist on the convenience of cordless phones, make sure the ones you do get are Energy Star-rated, for high energy efficiency.
Lisa is a freelance writer with a specialty in Internet content and SEO articles. She has written thousands of articles, hundreds of ebooks and thousands of website pages and related content. She has also authored her own books and works as a consultant to other writers, Internet marketers and Internet businesses.
Professional wordsmith for hire: gamer, wife, mother, entrepreneur, published poet, co-owner of game guides company (http://www.liti4.com), public speaker and Internet business consultant. You can learn more or follow Lisa’s blog from her website: http://www.freelancewriter4hire.com
The average solar cycle lasts for eleven years. The cycle includes a minimum of solar activity and a maximum. The sun is unusually quiet right now and has been for some time but there should be an increase in solar activity at some point in the near future.
The best current scientific estimate for the next solar maximum is 2012. If this estimate is correct, there is still a few years to try and prevent the potential of a future global disaster. A disaster that would begin on the surface of the sun and could end with tragedy on earth.
The surface of the sun is a mass of plasma that contains highly charged energy particles. Once in a while, some of these particles escape the suns surface and a mass of plasma travels through space on the solar wind. This process is known in scientific terms as a coronal mass ejection but it can also be called a solar storm.
A disaster for the planet would occur if a solar storm reaches and hits the earths magnetic shield in just the right way. If it were to happen, millions of people would lose their lives and the planet would be thrown into chaos as the technology that has become crucial to every day living suddenly gets taken away.
The perfect solar storm will start with skies that will be filled with a bright red aurora. However, soon everything will become dark as every electric bulb becomes devoid of light. The storms damage to the electric grid would be caused through an increased DC current. The runaway current would knock out and melt hundreds of key transformers within minutes, cutting off power for hundreds of millions of people.
Those damaged transformers cannot be repaired only replaced and installing a replacement takes a well-trained crew a week or more. Its incredible to consider that most major electrical utilities have just one or two suitably trained crews available for these type of transformer repairs. In addition, there are only a few spare transformers available and the rest would have to be built to order. Its a process that can take nearly twelve months.
So, the power blackout from the perfect solar storm would last for months but its not just the absence of light that would be the problem. Drinking water would still come through the taps for maybe half a day after the storm. With no electricity to pump water from reservoirs, there would be no more tap water after that.
The electric grid is necessary for almost all natural gas and fuel pipelines to operate. As a result, fuel and natural gas will quickly run out and without food delivery, supermarket shelves would soon become bare. Soon it would become necessary to control public hysteria and the military would have to be called in to restore civil order
There will be no power for heat, cooling or refrigeration until the grid is repaired and after their back up generators run out, hospitals will not be able to provide modern healthcare. A lack of water and food will result in spreading disease but Pharmaceutical companies without electricity will not be able to produce the necessary medicine.
Of course, many will say that this is absurd science fiction and it cannot happen here, but this chilling disaster scenario was outlined in a report released last January (funded by NASA) by the US National Academy of Sciences (NAS).
The fact is that a storm from the sun did hit the earths magnetic field in 1859. The effect of this solar storm on earth became known as the Carrington Event. The event was named after the amateur astronomer who observed two patches of intensely bright and white light emanating from a large group of sunspots that may have produced the event.
The solar storm that produced the Carrington Event created a red aurora across the planet from the poles to the tropics. Throughout the world, telegraph systems crashed, machines burst into flames, and electric shocks rendered operators unconscious. Compasses and other sensitive instruments reeled as if struck by a massive magnetic fist. It can happen again and the technology of the planet is now much more advanced and vulnerable.
The next solar maximum is estimated to return in about three years. A global disaster from the perfect solar storm can be prevented with proper contingency planning. There is still time for the government to be proactive and prepare to avoid disaster by creating a potential response to quickly repair the damage to the electric grid from the perfect solar storm.
James William Smith has worked in Senior management positions for some of the largest Financial Services firms in the United States for the last twenty five years. He has also provided business consulting support for insurance organizations and start up businesses. He has always been interested in writing and listening to different viewpoints on interesting topics. Visit his website at http://www.eworldvu.com or his daily blog at http://www.eworldvublog.blogspot.com
Earth Day, Giving Our Planet a Huge Birthday Party!
If you have a computer, imagine how you could make a difference!
How you say?
That is all I do, show others how to promote Earth day with a Professional Events Marketer that is sharing their knowledge specifically to get an important message out. Just imagine sending one note, or just telling a friend or colleague your business Supports Earth day!
It is not just about prestige it is about you creating value in your network. When you are seen to have a heart, this is attractive to people in all lifestyles. This can make your businesses look very good. Its attractive seeing a business you are involved with supporting a worthy cause!
Let me explain.
We have created Groups that are Non-profit just for helping with education, one is called Recycling Renegades, 10×10 at Face book and we have used many services that many do not know are there but used them strategically to spread the message about Earth Day. We are just getting the word out that Earth Day can Help Corporate create a better image.
To make it worthwhile for a businessperson to get involved, we have managed to get a great set of training on Social Traffic Media to get them interested in helping us with Earth Day.
Just look at the Fun we are having, but I have to say, it is a very serious message. Its not taken lightly as its global warming, pollution, rain forests rebuilding, forestry’s, clean ups on oil slicks and more. We have demonstrated our dedication with the work going into promoting Earth day and all the people fulling you tube channels and other Medias, just to get the word out about earth day, we are taking this serious.
Warning, it is not pretty! What is happening to this earth has been hidden and covered up, please if you have a weak stomach do not look and investigate.
Now look at all the Professionals that want to be part of this big picture and give a little time to learn better skills and Promote our Earth.
If over 2000 People see the Value, will you? Many together can make a loud voice for earth day do you not think it would be exceptional for your business to be involved in such a momentous occasion.
Get with it or be left behind, it is a simple decision!
Save the planet! As Earth Day approaches April 22, what are you doing to get ready? Earth day is an event that started to bring attention to our environment. How we handle our garbage reflects our environment. Here are three tips to help save our environment.
First, recycle. Recycling is taking some of our garbage and reusing it, directly or indirectly. To recycle a water bottle, you may reuse it again and again. But for gallon milk jugs or 2 liter soft drink bottles, you may opt to collect them and bring them to a recycling center. The recycling center will forward them on to a company that will melt them down and reprocess them.
Second, shop efficiently. Try using what your Grandma used when she cleaned her house. Try using vinegar and baking soda. There are lots of sites that recommend natural cleaning products instead of chemicals. Also, buy those products in bulk. It reduces packaging which ends up in our garbage dumps and it may be cheaper, the more you buy, the cheaper it is.
Third, conservation. Since I already have compact fluorescent light(CFL) bulbs installed, turning off the lights when I leave is the next best thing. My Mom always told me to turn off lights when I leave a room. She was right. Using more electricity only raises your electric bill. It will also increase your carbon footprint.
Education is a goal of Earth Day. Educating everyone from adults to children can get involved. Challenge your kids to come up with projects to bring attention to our environment. When we teach our next generation, we are saving our planet. But first, we must start ourselves. Be a steward of what God gave you. Become energy efficient by recycling and conservation. Our planet is worth it.
And now I would like to invite you to join me in learning energy saving tips you can do yourself to decrease your electric bill at http://energyconsciousconsultant.com Energy conservation should be out goal.
It will take all of us to make a significant impact in the world against global warming. The earth is in trouble because of the pollution that we may have caused. It would seem that we are apathetic to the earth’s plea for help. Every natural disaster that is happening to the world, to us, is caused by us. We may have caused it directly or indirectly.
One of the more significant effects of the damage that we have caused this planet is global warming. We may have been feeling how it is a little warmer, how the seasons are all in disarray. It is cold when it should have been hot and it is hot when it should have been cold. Typhoons are also stronger than ever before, aside from the fact that it is more frequent. And haven’t you noticed how a little rain could cause floods? Don’t you find that weird? Well, these are all the effects of global warming and we should be alarmed by it.
That is why natural and environmental causes such as the earth day should be supported because aside from minimizing the use of electricity which is by the way one of the causes of global warming. It brings about social awareness to inform those who are oblivious to what is happening to the world and it re-educates those who are aware. Information is the key and it may be the cure if we do it together. Great things are going to happen. Just the recent earth day brought about great changes that will be felt by the people for generations to come. Can you just imagine the positive effects that this will bring to mankind? Earth will benefit if it continues yearly. Who knows maybe one day global warming will no longer be a problem.
